Your source for the latest on sustainability, technology and innovation.

Your source for the latest on sustainability, technology and innovation.

Making a Microchip

In 2018, Apple began production on a new generation of microchips for iPhones. The computer company and Taiwan Semiconductor Manufacturing Co. (TSMC)  created the A12, a 7-nanometer design that’s smaller and more efficient than the previous 10-nanometer chip. In 2021, Apple and TMSC further advanced their microchips to create the M1 chip built on a 5-nanometer process. The new chip is faster, lasts longer, and uses less power than all previous chips. This incredible innovation poses a major question: how are microchips manufactured?

It starts with, of all things, sand. Normally, you’d want to keep sand far away from your electronics, particularly your phone. However, sand is one of the main components of silicon. Silicon is one of the most common elements on Earth, with about 28% (by mass) of the crust being composed of it. This makes it extremely affordable and accessible to use.

Silicon is also a semiconductor, meaning it conducts electricity under certain conditions and acts as an insulator in others. This makes it vital for integrated circuits, especially microchips. Additionally, this enables semiconductors to be used in extreme temperatures and conditions such as space.

The silicon must be processed before it can be used, however. It reaches 99.999% purity (also called “five 9s”) through chemical processes. Heat is used to create a purified silicon melt before it’s grown into a monocrystalline ingot. These ingots are massive, measuring up to seven feet in length and weighing 1,000 pounds. The ingots are sliced into super-thin wafers, less than 10 human hairs thick. However, the diameter of the wafers can range anywhere from four to eighteen inches. The wafers are then polished until they’re smooth and mirrored.

The wafer then undergoes a complex process, so the chip design can be transferred onto the wafer. Photolithography is used to project each of the thousands of layers onto the wafer. Each layer of the chip is electrically connected to the next with billions of transistors, and each circuit pattern is unique. A DUV (deep ultraviolet) light source is used to make the etching, much like the exposure step in photography (hence the name).

Each layer of the microchip is etched, polished, and integrated. Non-silicon elements, known as dopants, can be used to further modulate the electrical properties of each layer. When exposed to the proper amounts of other elements and heat and pressure, the silicon reacts by adjusting its conductivity. This step is essential for ensuring the chip works as intended and isn’t in danger of using too much/too little charge.

The conductive paths between layers are achieved by having the whole microchip be coated in metal, usually aluminum. The photolithography process is used again to remove all but the conductive pathways. For larger microchips, this may also involve multiple layers of conductors separated by glass.

Each individual spot on the is tested for functionality. If even one die isn’t working properly, the entire microchip must be discarded. But if all parts are functional, it’s noted and marked and moved onto the final step: packaging. The wafers are cut ultra-thinly and wires are attached. It’s further encased to protect from damage. The final product is the integrated chip found in all electronic devices.

In the case of cell phones, the process is virtually identical to that of creating microchips for laptops or game consoles. The only real difference is the overall size of the chip. Given that smartphones are much smaller than your average PC or tablet, the chip needs to be even smaller. This does mean sacrificing some of the processing power, but they’re still plenty dedicated enough to keep up with all we demand of our phones.

Making a microchip is expensive, difficult, and the driving force of electronics and the economy. As a result, the semiconductor shortage we are currently going through has a massive ripple effect on practically every industry. Even though they look deceivingly trivial and come from simple sources, don’t be fooled. Microchips are a very, very big deal in a very, very tiny package.

To discover more about space innovations, stream Tomorrow’s World Today’s “Semiconductors in Space” NOW on SCIGo and Discovery GO.

Learn something new with us? Is there anything we missed?

Share your thoughts with us.
Share on facebook
Share on twitter
Share on tumblr


8 Space Events In 2022

The future of space will be marked by private companies, missions to Mars, improved research, and more. 2022 continues this progress, with many exciting upcoming

Read More »